One page, the whole range
Most gabion listings publish a single mesh opening and a single box size, then quote everything else on request. This page does the opposite. Below is the complete range we hold tooling for - three mesh openings, the wire diameters that go with each, and nine standard box dimensions. You can size a structure and estimate landed cost before you ever send an enquiry.
Mesh opening and wire pairing
| Mesh size | Mesh wire | Selvedge wire | Tie wire |
|---|---|---|---|
| 60 × 80 mm | Φ2.7 mm | Φ3.4 mm | Φ2.0 mm |
| 80 × 100 mm | Φ2.7 / 3.7 mm | Φ3.4 / 4.4 mm | Φ2.2 / 3.2 mm |
| 100 × 120 mm | Φ3.0 mm | Φ3.9 mm | Φ2.0 mm |
Selvedge wire is always one gauge heavier than the mesh wire it edges. That is not decoration. The selvedge carries the lacing tension, and a basket laced through undersized edge wire opens at the corners during filling.
Nine standard box sizes
1×1×1 · 1.5×1×1 · 2×1×0.5 · 2×1×1 · 3×1×0.5 · 3×1×1 · 4×1×0.5 · 4×1×1.5 · 4×2×1 m (L×W×H)
Internal diaphragms every 1 m, factory-fitted. Without them a 4 m basket bulges past tolerance once stone goes in, and the wall face stops being a plane.
Surface treatment: match the environment, not the invoice
| Coating | Where it belongs |
|---|---|
| Hot-dip galvanized | Inland rivers, highway embankments, standard retaining walls |
| Galfan (Zn-5%Al) | Coastal zones, high-humidity and high-salinity soils |
| PVC coated | Chemically aggressive sites, marine shorelines, colour-matched landscape work |
What leaves the factory with each order
Baskets are flat-packed and bundled on steel pallets. Lacing wire, handling instructions and a mill test report for the wire batch travel with the shipment. Diaphragms are attached before packing, not shipped loose.
Send the drawing. If you have design loads, soil conditions or a bill of quantities, our engineers will match mesh, wire gauge and coating to it and come back within 24 hours with a specification you can put into a tender.
Selection Guide - match mesh to your wall height
| Structure | Mesh opening | Wire pairing | Why |
|---|---|---|---|
| Low walls < 1 m, decorative faces | 60×80 mm | Ø2.7 mm | Tighter weave holds small stone, finer face texture |
| Standard retaining walls 1–3 m | 80×100 mm | Ø2.7 / 3.7 mm | Best balance of strength and fill speed |
| Heavy walls, large stone, machine fill | 100×120 mm | Ø3.0 mm | Larger fill, faster machine loading |
Ordering Information
| Item | Details |
|---|---|
| MOQ | 1 × 20ft container (approx. 400–500 flat-packed boxes) |
| Lead time | 10–15 days galvanized · 18–20 days Galfan/PVC |
| Packing | Flat-packed, bundled on steel pallets, diaphragms factory-fitted |
| Port | Tianjin / Qingdao (direct from Anping, Hebei) |
| Documents |
Mill test report, coating thickness report per shipment
|

1,Which mesh opening should I pick for a 2 m retaining wall?
80×100 mm with Ø2.7 mm mesh wire is the workhorse for 1–3 m walls. Go to 100×120 mm only when you are machine-filling large stone and want speed; drop to 60×80 mm when the face will be seen up close. Send your wall height and retained soil and we will confirm the pairing.
2,Why is the selvedge wire always one gauge heavier?
The edge wire carries all the lacing tension. Lace a basket through undersized edge wire and it opens at the corners during filling. That one gauge is the difference between a wall that stays flat and one that bulges.
Hot Tags: gabion box specifications gabion box sizes standard gabion basket dimensions gabion box mesh size galvanized gabion box supplier, Fine Mesh Metals Gabions, Gabion Wire Mesh Panels, Galvanized Welded Gabion Cage, Galvanized Welded Gabion Cages, welded gabion, Welded Gabion Baskets
